- > Support
- > Driver Download
- > Resistive TP Driver
Debian(for x86) Driver
1. Please extract the driver source code firstly. Unzip “debian.tar.gz” to a temp working folder.
2.Enter terminal mode and change to root account by this command.(su)
3.Rebuild the TouchKit driver.
3.1) Locate the extracted directory. And go to the subdirectory /touchkit/include then type make new
3.2) Change the directory to /touchkit then type make all. The TouchKit driver will be rebuild. (Some packages must be installed and well configured).
3.3) type make install to begin to install at the same directory /touchkit
4.Edit the daemon configuration file “/etc/tpaneld.conf” if there is no device port you want. The configuration should contain some parameters description as below:
MouseMode = DRAWING
DblClickSpeed = 18
DblClickArea = 30
RclickTool = 0
Sound = 0
Port = /dev/ttyS0
Port = /dev/ttyS1
Port = /dev/psaux
Port = /dev/tkpanel0
Port = /dev/tkpanel1
The daemon tpaneld will scan the ports list in the configuration file to check if touchscreen controller exists or not .
/dev/tkpanel0 and /dev/tkpanel1 are used for USB model.